Posted by: Gábor | November 17, 2009

End-leaf on Front Cover

Due to the large size and weight of the book, exceptionally we started with gluing the end-leaf to the front cover. Our plan was not to glue the last 30 cm (~12 inch) of the end-leaf on the spine end, so the first page can go under it and we can fix them both to the front end. By mistake we have fully fixed this sheet to the cover, leaving only the a remaining of 28 cm (~11 inch) free.

Posted by: Gábor | November 13, 2009

Leather Spine Binding

Today we’ve added the leather binding to the front cover. This will bind the bookboards to the spine. Before applying the leather is glued and lined with brown cloth.

Posted by: Gábor | November 8, 2009

Covering with Leather the Front

We’ve done with covering the left bookboard with real leather. We’ve used 7 pieces of brown oxhide, total of 30 square metre (323 square feet).

Posted by: Gábor | October 30, 2009

Printing Finished

Printing of all pages finished. Total of 336 pages were printed on 12 large rolls. Out of that 2 rolls was used for the replacement of misprinted pages.

Posted by: Gábor | October 23, 2009

Front Cover

The front cover of the book finished. Size 418 × 400 cm (164.5 × 157.5 in). At the spine we need to cut to the final size.

Posted by: Gábor | August 13, 2009

Book Editing Finished

The editing of the last page of the Book was finished today.

Posted by: Gábor | July 27, 2009

Trial Printing

The first 4 pages were printed on the large paper roll. Pages 19, 20, 21 and 22.

After printing we unrolled them to see the result and test the bookbinding process. It was a good opportunity to see if there is any problem with the equipments, the size of the large tables. We hung one page to see the lifter mechanism to see how the sawing will be done.

The test was useful, finally we saw how the printed sheets will behave during unrolling, cutting and flipping and the most important thing: how we can handle the sheets in the air when they are lifted up.

A small modification is necessary on the DTP editing template so the prints on two sides of the sheet align perfectly.

Posted by: Gábor | July 26, 2009

Roll Rewinding

We have made 12 smaller rolls from the mother roll. The original roll is 3.8 m wide and weights about 1000 kg (approx. 2200 pounds).

Each small roll is about 100 meter (328 ft) long and weights 60 kg (132 pounds).

Posted by: Gábor | April 25, 2009

First Chapter Editing

The first chapter’s proofreading is done by the Editors.

« Newer Posts

Categories